SDME's QC-Max LNG carriers target 9.9% lower energy use | Marine & Industrial Report
, China
Photo by Oleksiy via Pexels

SDME's QC-Max LNG carriers target 9.9% lower energy use

Its 271,000-cubic-metre QC-Max vessels use five-tank containment systems.

Shandong Marine Energy (SDME) is developing 271,000-cubic-metre QC-Max liquefied natural gas (LNG) carriers.

The vessels are designed to cut energy consumption per tonne-nautical mile by 9.9% and achieve a carbon intensity indicator 23% lower than a standard 174,000-cubic-metre design.

The China-based company's LNG carrier projects include 175,000-cubic-metre vessels for Sinopec and long-term charter agreements with QatarEnergy covering six 174,000-cubic-metre carriers and three 271,000-cubic-metre QC-Max vessels.

A further project involving Minsheng Financial Leasing, Shell, and Jiangnan Shipyard covers four 175,000-cubic-metre LNG carriers that will provide long-term transportation services for Shell.

The 175,000-cubic-metre vessels under construction at Jiangnan Shipyard feature GTT Mark III Flex membrane containment technology, with a guaranteed boil-off rate of 0.085% of cargo volume per day.

The larger QC-Max vessels use the GTT NO96 Super+ containment system and a five-tank configuration.

Both the QC-Max and 175,000-cubic-metre vessels also use twin-skeg hull forms, high-efficiency propellers, and twisted rudders with rudder bulbs.

Silverstream air lubrication systems are expected to deliver fuel and emissions savings. The QC-Max vessels are designed to consume 9.9% less energy per tonne-nautical mile than a standard 174,000-cubic-metre design, according to shipyard figures.

The new vessels use WinGD's X-DF2.0 low-speed dual-fuel platform, in X72DF-2.1 and X72DF-2.2 variants, with Intelligent Control by Exhaust Recycling and variable compression ratio technologies.

These technologies can reduce methane slip by more than 50% compared with first-generation X-DF engines, with the lowest levels reaching approximately 0.5% to 0.7%, DNV said, citing SDME.

LNG dual-fuel auxiliary engines and permanent magnet shaft generators offer additional energy-efficiency gains.

The classification society has worked with SDME on the projects through plan approval and construction surveys, including oversight of containment and gas-handling systems and safety redundancy arrangements.

During plan approval, SDME, Jiangnan Shipyard, supervision teams, and DNV held multiple rounds of technical discussions.

The discussions covered the NO96 Super+ containment system, shaft generator operation in power take-in booster mode, reliquefaction system configuration, and real-time sloshing monitoring for the five-tank layout.

DNV has also provided independent technical assessments and certification for technologies including dual-fuel engines, air lubrication, reliquefaction, and intelligent vessel systems, alongside regulatory support and regular technical exchanges.

Onboard digital monitoring systems cover real-time sloshing and hull-stress monitoring, collision avoidance, and engine-room monitoring and automation.

These complement crew expertise by helping identify potential issues before they develop into incidents, according to SDME.

The company's safety measures also include crew selection, training, simulator exercises, and pre-employment assessments.

SDME has established dedicated LNG training programmes and an LNG Vessel Intelligence and Innovation Laboratory with Shanghai Maritime University.

Technologies for reducing methane slip and improving energy efficiency can require further investment, whilst maintenance, fuel, and compliance costs also affect the business case.

SDME sees LNG as having a role in shipping's transition towards lower and ultimately zero emissions, with bio-LNG and synthetic e-LNG offering potential opportunities to reduce life-cycle emissions.

“This makes forward-looking fleet planning and continuous monitoring of environmental requirements increasingly important as we seek to combine regulatory compliance with competitive vessel performance and long-term asset value,” said Dehua Sun, General Manager of SDME.

Join Marine & Industrial Report community
Join Marine & Industrial Report community
Since you're here...

...there are many ways you can work with us to advertise your company and connect to your customers. Our team can help you design and create an advertising campaign, in print and digital, on this website and in print magazine.

We can also organize a real life or digital event for you and find thought leader speakers as well as industry leaders, who could be your potential partners, to join the event. We also run some awards programmes which give you an opportunity to be recognized for your achievements during the year and you can join this as a participant or a sponsor.

Let us help you drive your business forward with a good partnership!